Macro Photography Lighting Tips



Besides story and audio, lighting is one of the most important considerations when making your own videos because it has the most impact for dramatically improving image quality. Next, set your light source's power to about half. Finding the right angles and lighting will help you achieve that bright, glowing look that's so appealing in jewelry photography. Level your product and light source so that they're on the same plane. If you're going for a darker, moodier look where you want the shadows to create a lot of contrast on your food, you can either leave the reflector out of the setup, or even use a black fill card to absorb more of the light to accentuate the shadows.

Manually exposing your image properly is usually just a matter of using your camera's light meter, which you can find by looking through your camera's viewfinder, and adjusting settings to make the meter notches reach 0. It isn't so simple when you're using a strobe, since there is no lighting for the camera to read until the flash fires.

Another approach to close-up and macro photography involves a bracket that holds one or two flash heads off-camera, with the bracket attached to the camera's tripod socket or the tripod mount on a lens. In fact, in the tight space of my living room, using a portable flashgun was actually much more convenient as the pro flash head tended to pump out too much light, even on its minimum setting.

Ring lights, which are also called Diva Lights (one of the brand names co-opted Kleenex-style to refer to all ring lights) by vloggers, have been a mainstay of professional videographers for a long time. Youtube is full of badly lit videos and putting just a little effort into lighting will help you stand out.

Make sure your camera settings take full advantage of your lighting setup, or all your effort may go to waste. They're lightweight, portable and lend themselves well to action shots and location photography. No light source is better than the other, but you should choose one color temperature and stick to it—meaning, don't shoot in daylight with a warm-tone artificial light source nearby.

Placing the two flashes very close to the lens concentrated the light on the interior of the flower. Coming to you from David Bergman of Adorama TV , this helpful tutorial shows you how a bit of on-axis light (in this case, a ring flash) can be used to fill in shadows just a bit on a subject.

In these situations we need to illuminate our subjects with artificial light sources. Again this is a mistake that is quite subtle and sometimes tricky to avoid but it's always worth being aware of it. A basic rule of lighting for me is that you always want to create ‘clean lighting'.

It also has balanced luminosity so they will do full justice to the micro shoots and provide the right amount of lighting necessary for images of this size. It seems like a bias toward the speedlight for nature subjects, where you want to use the flash to enhance the subject matter.

LED lights convert 80% of the energy they use into light; compared to standard tungsten's 20% efficiency, this is a huge improvement. In contrast, this shot has strong, visible catchlights and the subject Rmit Sharma looks a lot more approachable and less menacing. Key light: Used to create depth and shadows, this can be considered your main light.

A nice background can set the scene and tone for your videos. They're arguably the best lighting for YouTube videos, especially for vloggers and product reviewers. There's nothing technically wrong with the lighting above but you can see that it's almost impossible to tell where the model ends and where the background begins.

Leave a Reply

Your email address will not be published. Required fields are marked *